MegaSquirt Nissan 240SX 200sxMSPNP Gen2 Plug and Play ECU MSPNP2-NS9501a
or pay over time in interest-free installments with Affirm.
learn moreKA24DE 240SX 9501a MegaSquirtPNP Gen2 Plug and Play Standalone Engine Management System is compatible with the following:
- 1995 USDM Nissan 240SX with KA24DE engine and manual transmission
- 1996-1997 Nissan Hardbody Pickup with KA24E (manual transmission)
- 1995-1997 Nissan Sentra with SR20DE (manual transmission)
- 1995-1997 Nissan 200SX (USDM, front wheel drive, manual transmission)
- 1995-1996 Nissan Altima with KA24DE (manual transmission)
KA24DE 240SX 9501a MegaSquirtPNP Gen2 Plug and Play
KA24DE 240SX 9501a MegaSquirtPNP Gen2 Plug and Play #NS9501a Features:
- Fully Plug and Play Installation – No wiring required for basic functionality. Average install time is under 1 hour!
- KA24DE base map is pre-loaded to help your engine start on the first turn of the key (other model base maps included on USB stick)
- Real time tuning and data logging with a laptop connection
- Supports most aftermarket wideband sensors
Fully Tunable Engine Control!
- 16×16 Fuel Tables allow high resolution tuning
- 12×12 Ignition Tables
- Multiple Acceleration enrichment strategies
- Closed Loop Idle Speed Control
- Air Conditioner Control
- Up to 4 sequential fuel injector channels with individual trim tables (Add on trigger disc required for sequential injection)
- Onboard peak and hold drivers support both high and low impedance injectors – No external ballast resistor is needed!
- Allows removal of stock MAF
Advanced Feature Set (Included!)
- 12×12 Air Fuel Ratio Target Tables for use with wide band O2 sensor for precise tuning and table trim.
- Built-in 2-step rev limiter / launch control with flat shift
- Real time barometric correction
- Internal 4-bar MAP sensor reads up to 44PSI of boost
- Overboost protection
- Closed loop boost control (Requires EBC solenoid kit)
- Knock sensor input with adjustable sensitivity
- Headphone output for knock sensor – listen for knock while you tune!
- Table switching input. Change fuel and spark maps on the fly for different fuels, nitrous activation, etc.
- Input for flex fuel sensor – switch between E85 and gasoline on the fly!
- CANBus connector allows interconnection of other MegaSquirt-compatible devices for additional functions (EGT Input, Automatic Transmission Controller, Additional Sensors…..the possibilities are limitless!
What you get in the box:
- KA24DE 240SX 9501a MegaSquirtPNP Gen2 Plug and Play ECU
- MSPNP RS232 serial tuning cable, 6′ (USB adapter sold separately, if needed)
- Tuning Software and Documentation USB Stick
- 6′ Vacuum Hose for MAP Signal and ‘T’ fitting
- Four Screws for ECU mounting